Zirconium Sputtering Target，Zirconium Alloy Target

Zirconium Sputtering Target，Zirconium Alloy Target

Zr 702 Zirconium Round Plate Target for Sputtering Coating

Zirconium tube pipe ... Zirconium target: Zirconium parts

Zirconium tube pipe ... Zirconium target: Zirconium parts

Zirconium Target, Zirconium Metal Target, Zirconium Sputtering Target, Zirconium MetalSputtering Target, Zr Target, Zr Metal Target, Zr Sputtering Target, Zr Metal ,Zirconium Sputtering Target， Zirconium Alloy Target

Zirconium is a very strong, malleable, ductile, lustrous silver-gray metal. Its chemical and physical properties are similar to those of titanium. It is extremely resistant to heat and corrosion. Zirconium is lighter than steel and its hardness is similar to copper. Zirconium powder is black and is regarded as very dangerous fire hazard. It does not dissolve in acids and alkalis. It is used in alloys such as zircaloy, which is used in nuclear applications since it does not readily absorb neutrons. Also used in catalytic converters, percussion caps and furnace bricks.

irconium & zirconium alloy traget  by china supplier

1. Product name: High purity Zirconium Targets

2. Purity: Zr+Hf>99.95%, Hf<300ppm.

3. Confirmation: ISO9001:2008 certified 

4. Standard:GB/T OR ASTM B550

5.Trace Elements

Grade	Main Elements(ppm,max)
	Hf	Nb	Mo	Cr	Al	Ti	Mn	Ni
Zr+Hf>99.95%	200	5	10	10	100	10	5	50
	Cu	Sn	Sb	W	Pb	Bi	Mg	P
	5	50	5	10	5	5	5	10
	Si	N	C	H	O	S	Fe
	100	30	30	10	150	20	100

6.Following standards to be applied if no specific tolerance for billets is provided.

Dimension	Square	Tolerance	Measuring tools	Remarks
L(mm)	L	>-3	calliper or tape	L,W,T  represents length, width and thickness of the square.
W(mm)	W	>-3	calliper or tape
T(mm)	T	>-1	calliper

7.Following standards are to be applied when no specific requirements on flatness, parallelism and perpendicularity for products are provided.

(1) Flatness Standard; 

Shape	Round	Square	Round	Square	Square	Remarks
Dimension(mm)	D≤300	L≤500	D>300	500	X>1000
Tolerance(mm)	0.1		0.3		0.5	Thickness>8mm
Tolerance(mm)	0.25		0.35		0.5	Thickness≤8mm

(2)Parallelism and Perpendicularity

Dimension(mm)	D≤300	L≤400	D>300	400	X>800
Parallelism(mm)	0.1		0.25		0.3
Perpendicularity(mm)	0.15		0.25		0.3

(3)Roughness

Part	Back	Sputtering surface	The side and other surfaces
Ra(μm)	0.8-1.6	0.8-1.6	3.2

6.Featured Zirconium and zirconium alloys 
  1.For commercial Application (Hf ≤4.5%): 
     UNS R60700 (Zr1): Commercially pure, Zr+Hf≥99.2 
     UNS R60702 (Zr3): Commercially pure, Zr+Hf≥99.2 
     UNS R60704 (Zirconium-Tin alloy): Zr-1.5%Sn, Zr+Hf≥97.5 
     UNS R60705 (Zr5, Zirconium-Niobium alloy): Zr-2.5%Nb, Zr+Hf≥95.5, O≤0.18 
     UNS R60706 (Zirconium-Niobium alloy): Zr-2.5%Nb, Zr+Hf≥95.5, O≤0.16 
   2.For Nuclear Industry (Reactor grade, Hf ≤ 0.01%) 
      UNS R60001 (Zr0): 
      UNS R60802 (Zr2, Zircaloy2, Zirconium-Tin alloy): Zr-1.5Sn-0.15Fe-0.1Cr-0.05Ni 
      UNS R60804 (Zr4, Zircaloy4, Zirconium-Tin alloy): Zr-1.5Sn-0.2Fe-0.1Cr 
      UNS R60901 (Zirconium-Niobium alloy): Zr-2.5Nb, O-0.1% 
      UNS R60904 (Zirconium-Niobium alloy): Zr-2.5Nb 
      Zr-1Nb (Zr-1%Nb alloy)

   Chemical composition:                                  

 sale Astmb551 Zirconium Tube Pipe

Grade	Element composition(%)<
	Zr+Hf	Hf	Fe+Cr	Sn	H	N	C	Nb	O
R60702	99.2	4.5	0.20	--	0.005	0.025	0.05	--	0.16
R60703	98	4.5	--	--	--0.005	0.025	--	--	--
R60704	97.5	4.5	0.20~0.40	1.0~2.0	0.005	0.025	0.05	--	0.18
R60705	95.5	4.5	0.2	--	0.005	0.025	0.05	2.0~3.0	0.18
R60706	95.5	4.5	0.2	--	0.005	0.025	0.05	2.0~3.0	0.18

   Mechanical Properties:                                  

 sale Astmb551 Zirconium Tube Pipe

Material	State	Rm(≥)/MPa	Rp0.2(Pa	A50mm(≥)/%
Zirconium 702 (UNS R60702)	annealed	379	207	16
Zirconium 704 (UNS R60704)	annealed	413	241	14
Zirconium 705 (UNS R60705)	annealed	552	379	16